How To Install Your Rebelled LED Light Bar

How To Install Your Rebelled LED Light Bar

By REBELLED, Posted in LED Light Bars
June 04, 2018

 

Installing your own LED light bar doesn’t have to be complicated. With the proper instructions and tools, your REBELLED LED light bar installation should be easy. Follow these steps and you’ll be up and running with no issues.

singlerowlightbarcloseup2.png

First, be sure you have all the parts and tools you need. Double check that everything has arrived in your REBELLED light bar box. For tools, you’ll need screwdrivers and wrenches of various sizes, pliers, wire cutters, wire strippers, and crimpers for the connectors. Wire ties and vise locks would also be helpful throughout the process.

Test your light bar by connecting it to your vehicle battery before you begin the installation. Then, decide where on your vehicle you want to attach your light bar. Once you’ve determined where it’s going, it’s time to get your light bar secured.

Using the screws, washers, and brackets that came with your light bar, fasten the light bar to the bracket. Next, attach the bracket to your vehicle. You may have to drill holes if your vehicle is not pre-drilled.

Next, connect the wiring. By running the light bar wires from the light bar to the relay switch, you can connect the corresponding red and black wires to one another. Tip: either solder the wires together, or use a butt connector to connect them.

wireharness20A-2.png

You’re almost done! Hook up the light bar to your battery using the red and black wires. Make sure these connections are on tight and securely.

Test out your REBELLED LED light bar to make sure it’s working properly. Double check that the mounting is completely sturdy, and make sure all the wires are secure. Make sure not to stand too close to your LED light bar to avoid the risk of eye injury – these guys are the brightest lights out there!

singlerowlightbartop2.png

Congrats! It’s time to get out into the outdoors and enjoy your brand new LED light bar!